The AtlasIED TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante digital audio. The TSD-DAC2i can be used for any Analog to Dante digital audio end point but is ideally suited to be used with the AtlasIED WTSD wall mixer series. Once converted into Dante digital audio, the audio can be transmitted over IP networks and routed in the Dante Controller software. The TSD-DAC2i Dante transmitter I/O module features two analog balanced line inputs with a variable gain to operate from line to mic level. An Input Clip indicator illuminates when clipping signals are present. There are indicators for Power and Network connection. The TSD-DAC2i requires no external power supply, it is powered via a network PoE port or a PoE cable power injector.
Dante digital audio platform
2 CH balanced analog line input
Wide range gain adjust -20dB to +20dB
AUX, Line and Mic Levels
Input clip indicator
PoE powered
Mounting plate
Incorporates with WTSD wall mixers
Applications: Any project requiring a gateway from analog audio to network audio
Network audio signal end points
Hotel ballroom analog announcing stations
School gym / auditorium audio interface
Analog paging station conversions to dante digital audio
Transportation station audio interface
Dante Enabled - Yes
Spec Sheet available - Yes
Current Draw:
0.04 Amps
DC Voltage:
52 Volts
Peak Power:
1.90 Watt
Depth:
3.17 in
Height:
1 in
Shipping Depth (with packaging):
4.25 in
Shipping Height (with packaging):
2 in
Shipping Width (with packaging):
5.50 in
Width:
3.60 in
Product Weight:
0.44 lbs
Shipping Weight:
0.70 lbs
Color:
Black
System:
•Type 2-CH PoE Dante Transmitter • Network Connection: Single RJ-45, CAT-5 (or better), PoE Switch or Injector Required
Inputs>/b>:
•Input Connectors: Qty 1 •Type: 5 Position Phoenix Type, 3.5mm Pitch •Input Gain Selection (See Note 1): 0dBu Output When Reference to 20dBFS Equipment “0” = -10dBu, (230mV AUX Levels) “-20” = +10dBu, (2.5V Line Levels) “+20” = -30dBu (25mV Mic Levels) •Phantom Power: N/A
Status Indicators:
•Input: N/A •Output: N/A •Data: Green, Located on RJ45 •Network Audio: Blue, Qty 1 •Power: Yellow, Located on RJ45 •Input Clip: Red, Qty 1
Electrical Specifications:
•Analog Input Impedance: 15K? •Analog Output Impedance: N/A •Input Clip LED On Threshold: A. “-20” = 23.5 dBu +/-1dBu (11.8V) B. “0” = 9.4dBu +/-1dBu (2.3V) C. “+20” = -10.9dBu +/-1dBu (220mV) •Maximum Input Level: A. “-20” = 23.5 dBu +/-1dBu (11.8V) B. “0” = 9.4dBu +/-1dBu (2.3V) C. “+20” = -10.9dBu +/-1dBu (220mV) •Dante Transmission Speed: 100Mbps • THD 0.06% @ 1KHz •Signal To Noise: 95dB @ 1kHz (A Weighted) •Dynamic Range: 100dB (-60dBFS A Weighted)
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.