Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
5006-11A
Series: Surround Sound Microphones
Model: 5006-11A
Product Info
Tech Specs
Documents
A complete surround kit combining three 4006A Omnidirectional Microphones and two 4011A Cardioid Microphones, carefully factory-matched to achieve full precision. Even though the standard tolerances on the Microphone Series are extremely low, the surround match is even closer. The specially-selected 4006As are matched within ±0.5 dB on both frequency response and sensitivity. The 4011As are matched within ±1 dB. The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings.
- Microphone Type - Condenser
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): -40 F
- Warranty (Length/Type): 5 Years
- Directional characteristics: 4006A: omnidirectional. 4011A: cardioid
- Principle of operation: 4006A: pressure. 4011A pressure gradient
- Frequency Range: 10 to 20 Hz to kHz
- Frequency range, ± 2 dB: 4006A: 10 Hz to 20 kHz. 4011A: 40 Hz to 20 kHz
- Sensitivity, nominal, ±2 dB at 250 Hz: 4006A: 40 mV/Pa; -28 dB re. 1 V/Pa
- Sensitivity, nominal ±2 dB at 1 kHz: 4011A: 10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: 4006A: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)). 4011A: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
- Equivalent noise level, ITU-R BS.468-4: 4006A: Typ. 27 dB (max. 29 dB). 4011A: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL: 4006A: Typ. 79 dB(A). 4011A: Typ. 76 dB(A)
- Total Harmonic Distortion (THD): <1 % up to 139 dB SPL peak
- Minimum Load Impedance: 2 kohm
- Dynamic Range: 4006A: Typ. 124 dB. 4011A: Typ. 121 dB
- Max. SPL, peak before clipping: 4006A: 147 dB. 4011A: 159 dB
- Switchable attenuator: 0dB/-20dB
- Output Impedance: <200 ohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): >60 dB
- Power supply (for full specifications): 48 V Phantom power (± 4 V)
- Current Consumption: 2.80 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Weight: 4006A: 163 g (5.7 oz). 4011A: 158 g (5.6 oz)
- Diameter: 4006A: 16 to 19 mm (0.63 to 0.75 in). 4011A: 19 mm (0.75 in)
- Capsule Diameter: 4006A: 16 mm (0.63 in). 4011A: 19 mm (0.75 in)
- Output voltage, RMS: >5 V
- Polarity: +V at Pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Matching tolerance: 4006A: ± 0.5 dB. 4011A: ± 1 dB
- Phase deviation for kit: 4006A: < 5°. 4011A: < 10°
- Shipping Height (with packaging): 10 in
- Shipping Width (with packaging): 12 in
- Shipping Weight: 10 lbs
- Shipping Depth (with packaging): 12 in
- Color: Black
Surround Kit
1645 kb
- Data Sheet
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Diversified
close
Diversified
37 Market Street
Kenilworth, NJ 07033
USA
(908) 245-4833
www.onediversified.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 5006-11A
Request more information from a dealer near you
close
Request more information from a dealer near you
