MMP-B

Series: Pencil Microphones

Compare

Project List

Product Info

Tech Specs

Documents

A preamplifier with low cut and high-boost filters. Features active drive for impedance balancing.

Output Impedance: < 150 ohm
Current Consumption: 4.50 mA
Phantom Power: 48 V (± 4 V)
Output Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
Common Mode Rejection Ratio (CMRR): > 40 dB
Relative Humidity (RH): Up to 90%
Product Weight: 0.08 lbs
Warranty (Length/Type): 5 years
Dynamic Range: 124 dB
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): -40 F
Output balance principle: Signal balanced
Output voltage, RMS: > 1.8 V
Low-cut frequency, -3 dB: 50 Hz
Noise with shorted input, A-weighted: 1.1 µV
Output voltage, peak: > 2.5 V
Type of electronic circuit: Active
THD@1VRMS, 1kHz: < 0.5 %
Switchable filters:
High boost: +4 dB at 8 kHz
Low cut: First order filter, below 120 Hz
Shipping Height (with packaging): 1 in
Shipping Width (with packaging): 6 in
Shipping Weight: 1 lbs
Shipping Depth (with packaging): 3 in
Color: Black

Preamplifier 1307 kb - Data Sheet

Project List

by Yamaha Corporation

by Evertz

by Yamaha Corporation