8-inch enhanced pattern-control two-way coaxial ceiling loudspeaker system provides much better music fidelity and speech intelligibility in spaces with high ceiling heights. Its 75° coverage pattern provides the same coverage area when used in 21ft ceiling as typical flush mount mounted unit in an 8ft ceiling. This loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of bezel/waveguide assembly, grille, rear enclosure, 8-inch coaxial two-way loudspeaker with waveguide coupled titanium coated dome tweeter and internal line-matching transformer. It utilizes transformer that offers selection of 7.5 (70V only), 15, 30 or 60W delivered to the loudspeaker system using either 70 or 100V lines or 8 Ohms bypass. Selection is via a convenient switch on the front of the waveguide. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure with fiberglass damping material provides an optimum internal volume for extended low-frequency performance. A rear cover with provisions for junction box fitting provides access to 4-pin terminal block that allows direct connection to the speaker with 12-gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2HC ceiling system in drop ceiling that uses mineral wool or other fiber-based ceiling tiles. They provide controlled dispersion, high-efficiency, high-maximum output, ease of installation and wide-range reproduction of music or voice.
Maximum fidelity and intelligibility for high ceilings
Ported enclosure for extended bass response
Waveguide-coupled 1-inch titanium coated tweeter
Full-bandwidth overload protection
Integrated low loss matching transformer allows for either 70/100V or 8 Ohms operation
Front-panel mode/wattage selector
Internally damped heavy-gauge steel enclosure
Safe, easy installation with included tile bridge and mounting ring
White semi-gloss perforated grille
Complete package, requires no additional accessories
Loudspeaker Mount Type - Ceiling
Transformer Option - Yes
Loudspeaker Voltage - 70V
Loudspeaker Voltage - 100V
Spec Sheet available - Yes
Speaker Diameter (Driver):
12.60 in
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
50 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
100V Taps:
15, 30 or 60 Watt
70V Taps:
7.5, 15, 30 or 60 Watt
Power Handling:
75 Watt
Sensitivity:
93 dB
Transformer Option:
Yes
Chassis Size:
8 in (203.2mm)
Nominal Coverage (Conical):
75 ° (above 1kHz)
Nominal Impedance:
8 ohms (transformer bypass)
Maximum Continuous Calculated SPL:
112 dB
Maximum Peak Calculated SPL:
118 dB
LF Transducer:
8-inch (203.2mm)polypropylene cone plus waveguide
HF Transducer:
1-inch (25mm) Ti Mylar laminate dome
Connector:
Phoenix type removable with screw terminals and loop-through, accepts 12-gauge wire
Enclosure Material:
Steel enclosure and UL94V-0 rated baffle and bezel
Grille:
Powder-coated steel
Color:
White
Peak Power:
300 Watt
Height:
11.90 in
Shipping Weight:
30 lbs
Product Weight:
13.20 lbs
EVID C10.1
- 10-inch High-power Ceiling Subwoofer System
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.