Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
12-in Analog Clock with NTP
Model: 1212T
- Automatic detection of 30 Fps or 25 Fps SMPTE LTC timecode input
- May act as an NTP client when +T option is ordered
- Three motors for quiet operation and rapid hand setting - sets to time in 10s
- Automatic Daylight Saving Time adjustment
- Addressable slave clocks with programmable time offsets of 0 to 23.5 hours in 0.5 hour increments - set via DIP switches, RS-232 control or VistaLINK®
Product Info
Tech Specs
Related Products
The 1200T series Analog Clock Displays take master and slave clock technology to new levels of convenience and excellence. The clocks are microprocessor controlled and employ separate direct drive motors for each hand.This means that, as well as being able to set the time almost instantaneously, the new displays are also silent in operation.The hands of the clocks can be programmed to move in sweep mode or in steps.
- Automatic detection of 30 Fps or 25 Fps SMPTE LTC timecode input
- May act as an NTP client when +T option is ordered
- Three motors for quiet operation and rapid hand setting - sets to time in 10s
- Automatic Daylight Saving Time adjustment
- Addressable slave clocks with programmable time offsets of 0 to 23.5 hours in 0.5 hour increments - set via DIP switches, RS-232 control or VistaLINK®
- Accepts date information from LTC User Bits using SMPTE ST 309 or Leitch™ protocol
- Master or Slave operation with battery backed up clock
- Single cable distribution for both power and NTP using IEEE 802.3at Power over Ethernet
- Optional back lighting of clock face
- Two sizes 12"
- Time may be set manually via pushbutton switches, or through the RS-232 serial port, or via VistaLINK®
- Completely self-setting with NTP, (optioal) SMPTE timecode input or battery back-up
- Built-in quartz time base oscillator with battery back-up
- May be configured as a timecode generator to drive other clocks
- Lighting brightness is adjustable
- Powered by 12V DC (with 50/60Hz, 100 to 240V AC adapter), or IEEE 802.3at Power over Ethernet
- 10/100Mbit Ethernet port for NTP and SNMP control/monitoring with VistaLINK® Pro
- AC Voltage: 240 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 12 Watt
- DC Voltage: 12 Volts
- Depth: 2.52 in
- Height: 12.99 in
- Width: 12.99 in
- Product Weight: 6.50 lbs
- Standard: SMPTE ST 12-1 linear time code - 25 or 29.97 drop-frame Fps nominal
- Connector: Phoenix 4 pin terminal connector
- Signal Level: 1V p-p nominal
- Input Impedance: > 30Kohm
- MODE: configurable as loop thru from input or output of local clock time
- Accuracy: < 2s per day with power on, no timecode present < 10s / day with power removed
- Time Zone Offset: 0 to 23½ hours in ½ hour increments
- Level: RS232
- Baud Rate: 57.6 Kbaud
- Format: 8 data bits, no parity, 2 stop bits
- Network Type: Fast Ethernet 100 Base-TX IEEE 802.3u standard for 100 Mbps baseband CSMA/CD local area network
- Supports Type 1 Power over Ethernet:
- NTP Standard: NTP v4 compliant, client mode support when +T option installed
- Type: CR-2032 3 volt lithium cell
- Life expectancy: > 5 years
Thank you!
Someone will be in touch with you shortly.
Contact Diversified
close
Diversified
37 Market Street
Kenilworth, NJ 07033
USA
(908) 245-4833
www.onediversified.com
Contact in regards to this product:
Evertz
Model: 1212T
Request more information from a dealer near you
close
Request more information from a dealer near you
