Smart Automatic changeover based on user programmable switch logic
Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
The 7700ACO2-HD incorporates Evertz® essential audio and video monitoring which is used to drive the real time automatic switch logic processor.Common parameters include user configurable loss of signal, freeze, and black detect.The 7700ACO2-HD can optionally be ordered with Evertz's patented IntelliGain® Audio and Loudness Processor.The IntelliGain® processor is designed to normalize perceived differences in audio loudness in real time for any HD/SD-SDI signal with embedded audio.This module will internally de-embed the audio signals, regulate the signal level based on a used defined target loudness level, then re-embed the corrected audio signals back into the video output.
Auto sensing of HD and SD input formats
Smart Automatic changeover based on user programmable switch logic
Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
Bypass relay protection on main program output
Integrated SoftSwitch™ technology for clean video and "popless" embedded audio switching
IntelliGain® Audio and Loudness Processor
Consistent audio loudness levels within a channel and/or program
Gain control within a program interval to preserve audio dynamic range
Artifact-free transitions between program and commercials
Elimination of drastic volume changes during commercials and interstitials
Ideal for aggregator applications and multi-channel playout facilities (DTH, Cable, IPTV
Spec Sheet available - Yes
Active Power:
20 Watt
DC Voltage:
12 Volts
Standard:
Auto-detects standard 1.485Gb/s SMPTE ST 292-1 (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) SMPTE ST 260, SMPTE ST 274, SMPTE ST 296, SMPTE ST 349 (HD or SD carrier) 270Mb/s SMPTE ST 259-C (525i/59.94 or 625i/50)
Number of Inputs:
2
Connector:
BNC per IEC 61169-8 Annex A
Input Equalization:
Automatic 100m @ 1.5Gb/s with Belden 1694 or Equivalent cable
Return Loss:
> 20dB up to 270MHz, > 12dB up to 1.5GHz
Number of Outputs:
2 Smart switched program outputs (Input 1 is bypass relay protected) Loop thru on Input A and Input B
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.