The 7707CVDTAxx-A4-F2 is a VistaLINK® - capable composite analog video, 4-channel audio and bi-directional RS-232/422 fiber optic transmitter for broadcast quality video signals.
Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
Supports both NTSC and PAL video signals
Broadcast quality analog video and audio performance
2 bi-directional RS-232 or 1 bi-directional RS-422
Superior digital data transmission
Signal transport over fiber uninterrupted by loss of input video, audio or data feeds
Adjustable gain equalization for up to 300m of Belden 1694A coaxial cable
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Analog Video Input Standards:
NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog Video Input Number of Inputs:
1
Analog Video Input Connector:
BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization:
12 bits
Analog Video Input System Bandwidth:
5.5MHz
Analog Video Input Input Level:
2V p-p (Maximum)
Analog Video Input Gain Equalization:
Up to 300m of Belden 1694A or equivalent (adjustable)
Analog Video Input Input impedance:
75 ohm
Analog Video Input Return Loss:
> 30dB to 5.5MHz
Analog Video Outputs Standard:
NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog Video Outputs Number of Outputs:
1 buffered version of input
Analog Video Outputs Connector:
BNC per IEC 61169-8 Annex A
Analog Video Outputs Output Level:
1V p-p
Analog Video Outputs Output Impedance:
75 ohm
Analog Video Outputs Return Loss:
> 30dB to 5.5MHz
Analog Audio Inputs Number of Inputs:
4
Analog Audio Inputs Type:
Balanced analog audio
Analog Audio Inputs Connector:
12-pin removable terminal block
Analog Audio Inputs Input impedance:
High Impedance (> 20kohm)
Analog Audio Inputs Max. Audio Input Level:
+24dBu
Analog Audio Inputs Signal Quantization:
24 Bits
Analog Audio Inputs Freq. Response:
±0.1dB, 20Hz to 20kHz
Serial Data Ports Number of Ports:
1 RS-422 or 2 RS-232 - Jumper Selectable
Serial Data Ports Connector:
4 pins (plus ground) on 16-pin removable terminal block
Serial Data Ports Baud Rate:
Up to 3Mb/s (Determined by incoming data)
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.