The 7751SRG-HD generates various analog bi-level & tri-level sync signals for both HD and SD applications. The 7751SRG-HD provides an analog genlock input that allows you to synchronize the sync signals to your plant horizontal and vertical timing. The 7751SRG-HD generates all analog sync signals defined by SMPTE ST 274 (1080i/p) and SMPTE ST 296 (720p) as well as those required for NTSC, PAL and slow PAL (625i/48) applications. Sync signals generated for NTSC, PAL and slow PAL applications are sync signals only and do not incorporate color burst signals. The four independent sync outputs can be configured to output different sync signals. The common combinations of HDTV and SD analog sync outputs can be selected via card edge control. In conjunction with the 7700ADA7 Analog Distribution Amplifier and the 7751TG2-HD HDTV Test Signal Generator, this module will fulfill all of your slave sync generation requirements.
NTSC or PAL color black gen lock or free-runs with no genlock reference
Phase adjustment of outputs with respect to gen lock input
Selectable frame rate divisor of 1 or 1/1.001
Wide variety of 1080i, 1035i, 1080p, 720p and NTSC/PAL/slow PAL sync output sync signals (excluding burst)
HSDL tri-level sync for 2K data transfers
4separate analog sync signal outputs
6Hz or 1Hz TTL pulse shows relationship between HD & SD Sync outputs
8 position DIP switch selects combinations of sync signal available
Card edge LEDs indicate gen lock presence, module fault
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
Spec Sheet available - Yes
Genlock Input - Type:
NTSC or PAL Color Black 1V p-p Composite Bi-level sync (525i or 625i) 300mV
Genlock Input - Connector:
1 BNC per IEC 61169-8 Annex A
Analog Sync Outputs - Standard:
SMPTE ST 274, ST 296, NTSC, PAL, 6Hz TTL, HDSL (selectable as per above table) NTSC/PAL signals are sync signals only (no burst)
Analog Sync Outputs - Connectors:
4 BNC per IEC 61169-8 Annex A
Signal Level - HD Sync Outputs:
600 mV nominal tri-level
Signal Level - SD Sync Outputs:
300 mV nominal bi-level
Signal Level - 6Hz Output:
TTL
Electrical - Voltage:
6 Watts
Physical - Number of Slots:
1
Active Power:
6 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Complies with FCC Part 15, Class A, EU EMC Directive
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.