The 7751TG2-HD Test Signal Generator provides a cost-effective method of generating 1.5Gb/s HDTV 4:2:2 and 4:4:4 test signals. The 7751TG2-HD is ideal for checking signal path integrity, or to determine system performance over varying cable lengths.The 7751TG2-HD generates test signals in a wide variety of SMPTE ST 292-1 video formats. In single link mode, the 7751TG2-HD outputs a 4:2:2 black signal on two outputs and the selected 4:2:2 test signal on the remaining two outputs.In dual link mode, the 7751TG2-HD outputs a 4:4:4 test signal on two dual-link 4:4:4 outputs.The 7751TG2-HD provides for an analog genlock input that allows you to synchronize the test signals to your plant horizontal and vertical timing. Separate audio tones can be embedded into each channel of the four embedded audio groups. The user can select which of the audio groups the tones will be embedded into. In dual link mode, the selected audio group can be embedded into either or both links. The audio level is fixed at -20dB full scale.
Wide variety of 1080i, 1080p, 1035i, 720p and 480p output formats
8 position DIP switch selects output format, single or dual link and genlock reference
Card edge toggle switch selects test signal
Selectable genlock input format; bi-level or tri-level sync, colour black
Embedded audio tones for 4 groups, selectable audio group assignment
Closed caption test messages
2 black outputs, 2 test gen. outputs in 4:2:2, 2 dual link test gen. outputs in 4:4:4
On screen display of test signal names
On screen setup menu
Tally output upon loss of genlock
Card edge LED's indicate genlock presence, module fault and audio signal presence on the output
SMPTE ST 334 - EIA 708 advanced captioning test packet
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
Signal Generator Type - Audio
Tester Format - Board/Card
Spec Sheet available - Yes
Input Signal Types:
Audio
Rack Units (Height):
1
Active Power:
6 Watt
DC Voltage:
12 Volts
Height:
1.89 in
Width:
4.49 in
Product Weight:
1.50 lbs
Type:
Menu selectable - depends on output video format HD Tri-level Sync, NTSC or PAL Color Black 1V p-p, Composite Bi-level sync (525i or 625i) 300mV
Number of Inputs:
1
Connector:
BNC per IEC 61169-8 Annex A
Termination:
75? (jumper selectable)
Single Link Mode:
SMPTE ST 292-1, 4:2:2 YCbCr
Dual Link Mode:
SMPTE ST 372, 4:4:4 YCbCr, or 4:4:4 GBRA
Embedded Audio:
Up to 4 tones in one audio group as specified in SMPTE ST 299-1. Selectable tone frequencies (from 60Hz to 10kHz) and audio group. Audio can be embedded on either or both links. Audio level is set to -20dB Full Scale
Source ID:
User programmable on-screen 15 character source ID message - selectable position. On Screen message can be displayed on either or both links
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.