Two independent video paths supporting 3G/HD/SD-SDI video – supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
1 bypass protected BNC Serial Digital Output from each input – with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
1 Monitor output from each input with visual character display of timecode
Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in
The 7800TM2-3G occupies one card slot and the 7800TM2-XIO-3G and the 7800TM2-IRIG-3G occupy two card slots in the 3RU 7800 series frame, which will hold up to 15 modules. The 7800TM2-3G series Modular Time Code Processor expands on the professional line of time code solutions by Evertz. The 7800TM series modules provide dual time code processing paths supporting 3G/HD/SD-SDI video signals. This unit is a combination Generator, Reader and Character Inserter for LTC, D-VITC (SDI only) or Ancillary Time Code (ATC). Applications such as reading LTC, D-VITC or ATC time codes and creating a visual burn-in or "transcoding" LTC to D-VITC or ATC time codes are natively supported. The 7800TM2-XIO-3G version additionally provides 6 GPIOs per channel for control of various functions and for encoding/decoding GPI information in the timecode user bits. It also provides two serial ports that can be used to read timecode from devices supporting the Sony 9 Pin RS-422 compatible ports. The 7800TM2-IRIG-3G version contains an IRIG-B Reader to burn IRIG time into the video as well as inserting the IRIG data into D-VITC and ancillary data packets. The IRIG data source for the burn-in windows is selectable between the IRIG-B reader and the ancillary data/D-VITC IRIG readers. Thje IRIG data can be transcoded to SMPTE time code so that video tapes and servers can be searched using commonly available SMPTE time code based equipment. Most of the regular features of the XIO version are also available on the IRIG version.
Two independent video paths supporting 3G/HD/SD-SDI video – supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
1 bypass protected BNC Serial Digital Output from each input – with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
1 Monitor output from each input with visual character display of timecode
Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in
Reads D-VITC (SDI only) and/or ATC and transcodes to LTC
Character Inserter displays time and/or user bits in the picture – user programmable positioning - available on Monitor and Program outputs
Outputs referenced to input or 7800 frame genlock reference
Card edge menu using OSD to configure the operating modes
Card Edge LEDs for signal presence, module status
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
6 Programmable GPI control inputs per channel (12 total) - select modes
Ability to ‘sniff' Sony Protocol time code and convert to LTC, D-VITC or ATC as required
External Reference BNC
4 Up/Down timers to time program segments - outputs available on separate LTC outputs (total of 4 LTC outputs). Timer control and outputs available via on-board Ethernet port
IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated and pulse width modulated codes (format B122) and makes visual character burn-in
Encodes IRIG data in VANC packets on HD output video
Reads IRIG data encoded in VANC packet from incoming HD video
IRIG data encoded to second line of D-VITC generator with special CRC on SDI video
Reads IRIG encoded in D-VITC from incoming SDI video
SMPTE Time Code LTC, D-VITC and ATC generators can be slaved momentarily or continuously to IRIG reader – converts milliseconds to closest video frame number. Milliseconds and days can be transferred to VITC user bits
Character Inserter displays IRIG day and time to millisecond resolution in the picture IRIG modes
IRIG CS-6 compatible serial data output to drive external IRIG display
Spec Sheet available - Yes
Serial Digital Video Inputs - Standard:
270Mb/s SMPTE ST 259-C 10 bit 4:2:2 (525i/59.94, 625i/50); 1.485Gb/s SMPTE ST 292-1 10 bit 4:2:2 (1080i/60, 1080i/50, 1080p/30, 1080p/30sF, 1080p/25, 1080p/25sF, 1080p/24, 1080p/24sF, 720p/60, 720p/50, 720p/30, 720p/25, 2048 x 1080p/30, 2048 x 1080p/25, 2048 x 1080p/24); 2.97Gb/s SMPTE ST 424 & SMPTE ST 425-1 Level A and Level B-DL 10 bit 4:2:2 (1080p/60, 1080p/50, 2048 x 1080p/60, 2048 x 1080p/50)
Serial Digital Video Inputs - Number of Inputs:
2
Serial Digital Video Inputs - Connector:
BNC per IEC 61169-8 Annex A
Serial Digital Video Inputs - Signal Level:
1 V nominal
Serial Digital Video Inputs - Input Equalization:
Automatic to 100m @ 1.485Gb/s with Belden 8281 or equivalent; Automatic to 80m @ 2.970Gb/s with Belden 8281 or equivalent
Serial Digital Video Inputs - Return Loss:
>15dB to 1.5GHz; >10dB to 3.0GHz
Serial Digital Video Outputs - Standard:
Same as inputs
Serial Digital Video Outputs - Number of Outputs:
2 PGM (Relay Bypass Protected to Inputs); 2 MON with On Screen Display menu and character burn ins
Serial Digital Video Outputs - Connector:
BNC per IEC 61169-8 Annex A
Serial Digital Video Outputs - Signal Level:
800 mV nominal
Serial Digital Video Outputs - HD Rise/Fall Times:
200 ps nominal
Serial Digital Video Outputs - Return Loss:
>15dB to 1.5GHz; >10dB to 3.0GHz
Reference Video Input - Type:
HD Tri-Level sync, NTSC or PAL Colour Black 1V p-p
Reference Video Input - Connector:
Frame Genlock. BNC per IEC 60169-8 Annex A (2 slot versions only)
Reference Video Input - Termination:
75 ?
LTC Inputs and Outputs - Standard:
SMPTE ST 12 LTC
LTC Inputs and Outputs - Frame Rates:
24, 25 and 30 fps nominal
LTC Inputs and Outputs - Connector:
2 BNC per IEC 61169-8 Annex A, Micro 9 pin D for auxiliary LTC Outputs
LTC Inputs and Outputs - Number:
1 LTC In, 1 Switchable LTC In or LTC Out, 3 additional auxiliary LTC outputs on XIO version
LTC Inputs and Outputs - Termination:
75 ? unbalanced
LTC Inputs and Outputs - Output Level:
1V p-p nominal unbalanced, 1 V p-p nominal balanced for auxiliary LTC outputs on XIO version
LTC Inputs and Outputs - Input Level:
0.2 to 4 Vp-p unbalanced
IRIG Reader - Standard:
IRIG 200-95 Format B122
IRIG Reader - Connector:
DB15 Female
IRIG Reader - Input Level:
0.2 to 4 V p-p balanced or unbalanced
GPI/O - Number:
12 configurable as inputs or outputs
GPI/O - Type:
Opto-isolated, active low with internal pull-ups to +5 V
GPI/O - Connector:
Female DB 15
GPI/O - Signal Level:
Closure to ground
GPI/O - Function:
User preset select or programmable functions
Serial Ports - Number:
2
Serial Ports - Connector:
Female DB 9
Serial Ports - Signal Level:
RS-232/RS-422
Serial Ports - Baud Rate:
Selectable baud rates (38,400 default)
Serial Ports - Function:
Read Sony Protocol time code; Serial A configurable for auxiliary LTC outputs (on XIO version); IRIG CS-5 input or CS-6 output (on IRIG version only)
Physical - Number of Slots:
2
Active Power:
12 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Complies with FCC regulations for class A devices Complies with EU EMC directive
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.