Pro AV Catalog
 
evertz

Dual Time Code Processor with GPIO and Serial I/O

Model: 7800TM2-XIO-3G

  • Two independent video paths supporting 3G/HD/SD-SDI video – supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
  • 1 bypass protected BNC Serial Digital Output from each input – with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
  • 1 Monitor output from each input with visual character display of timecode
  • Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
  • Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in
Compare
Project List
Product Info
Tech Specs
Documents
The 7800TM2-3G occupies one card slot and the 7800TM2-XIO-3G and the 7800TM2-IRIG-3G occupy two card slots in the 3RU 7800 series frame, which will hold up to 15 modules. The 7800TM2-3G series Modular Time Code Processor expands on the professional line of time code solutions by Evertz. The 7800TM series modules provide dual time code processing paths supporting 3G/HD/SD-SDI video signals. This unit is a combination Generator, Reader and Character Inserter for LTC, D-VITC (SDI only) or Ancillary Time Code (ATC). Applications such as reading LTC, D-VITC or ATC time codes and creating a visual burn-in or "transcoding" LTC to D-VITC or ATC time codes are natively supported. The 7800TM2-XIO-3G version additionally provides 6 GPIOs per channel for control of various functions and for encoding/decoding GPI information in the timecode user bits. It also provides two serial ports that can be used to read timecode from devices supporting the Sony 9 Pin RS-422 compatible ports. The 7800TM2-IRIG-3G version contains an IRIG-B Reader to burn IRIG time into the video as well as inserting the IRIG data into D-VITC and ancillary data packets. The IRIG data source for the burn-in windows is selectable between the IRIG-B reader and the ancillary data/D-VITC IRIG readers. Thje IRIG data can be transcoded to SMPTE time code so that video tapes and servers can be searched using commonly available SMPTE time code based equipment. Most of the regular features of the XIO version are also available on the IRIG version.
  • Two independent video paths supporting 3G/HD/SD-SDI video – supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
  • 1 bypass protected BNC Serial Digital Output from each input – with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
  • 1 Monitor output from each input with visual character display of timecode
  • Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
  • Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in
  • Reads D-VITC (SDI only) and/or ATC and transcodes to LTC
  • Character Inserter displays time and/or user bits in the picture – user programmable positioning - available on Monitor and Program outputs
  • Outputs referenced to input or 7800 frame genlock reference
  • Card edge menu using OSD to configure the operating modes
  • Card Edge LEDs for signal presence, module status
  • VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
  • 6 Programmable GPI control inputs per channel (12 total) - select modes
  • Ability to ‘sniff' Sony Protocol time code and convert to LTC, D-VITC or ATC as required
  • External Reference BNC
  • 4 Up/Down timers to time program segments - outputs available on separate LTC outputs (total of 4 LTC outputs). Timer control and outputs available via on-board Ethernet port