Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
RF Amplifier with Slope Compensation
Model: 7803PA-2-LNB2
- Can be used as a wideband amplifier without slope compensation for signals from 40 - 2300MHz or as an amplifier with slope compensation for extended L-Band signals from 950 - 2150MHz
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display
Product Info
Tech Specs
Documents
The 7703PA series provide amplification of RF signals in the satellite extended L-Band range. Adjustable slope compensation is included. Typical applications include amplification and slope compensation to boost weak signals, drive long coax runs or provide a high power signal for passive distribution systems.
All models occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Can be used as a wideband amplifier without slope compensation for signals from 40 - 2300MHz or as an amplifier with slope compensation for extended L-Band signals from 950 - 2150MHz
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display
- Up to 30dB gain, adjustable in 0 – 5dB steps
- AGC mode with adjustable target level to maintain a constant output level with varying input
- Cable slope compensation, adjustable up to 15dB in 1dB steps
- RF input power monitoring
- Remote monitoring through SNMP and VistaLINK® PRO capability
- 7803PA-2-LNB2 (Must be used with 7800FR or 7801FR):
- Dual channel amplifier with built-in LNB power up to 400mA
- LNB power is 13/18V DC adjustable with built-in current limiting, current monitoring and 22kHz tone for LO control
- Spec Sheet available - Yes
- Active Power: 18 Watt
- DC Voltage: 12 Volts
- Number of Inputs: 2
- Number of Outputs: 2
- Connector: BNC per IEC 61169-8 Annex A (F-Type optional)
- Impedance: 75ohms (50ohms optional)
- 950 - 2150MHz: > 14dB
- 40 - 2300MHz: > 10dB
- Input Power Range: -10dBm to -60dBm
- Voltage: 13V DC, 18V DC, off (selectable)
- Current: 400mA
- Protection: Short circuit, current limited
- LO Control: 22kHz on/off (selectable)
- Number of Slots: 1
Amplifier
175725 kb
- Data Sheet
Thank you!
Someone will be in touch with you shortly.
Contact Diversified
close
Diversified
37 Market Street
Kenilworth, NJ 07033
USA
(908) 245-4833
www.onediversified.com
Contact in regards to this product:
Evertz
Model: 7803PA-2-LNB2
Request more information from a dealer near you
close
Request more information from a dealer near you
