ST-IPHD-POELC-V4 | Low-Cost HDMI Over Gigabit IP Extender with IR and Power over Ethernet (POE) (Next Generation Model) | Network Technologies Inc (NTI) | Diversified
Pro AV Catalog
Signal Processing Systems : Extenders & Repeaters : Network Technologies Inc (NTI) - ST-IPHD-POELC-V4
Network Technologies Inc (NTI) - ST-IPHD-POELC-V4
All Products
network-technologies-nti

Low-Cost HDMI Over Gigabit IP Extender with IR and Power over Ethernet (POE) (Next Generation Model)

Series: XTENDEX

Model: ST-IPHD-POELC-V4

  • Supports HDTV resolutions to 1080p. Extend up to 394 feet (120 meters) with CAT6/6a/7 cable. Extend up to 328 feet (100 meters) with CAT5e cable.
  • Cascade network switches to extend the length long distances. Up to three switches can be cascaded.
  • The max cable length between the first switch/transmitter and the last switch/receiver is 1,575 feet (480 meters) for CAT6/6a/7 or 1,312 feet (400 meters) for CAT5e cables. The max cable lengths between switches is switch dependent, but 394 feet (120 mete
  • Power over Ethernet (PoE) – power supply not required at the local or remote unit.
  • Ideal solution for digital signage applications.
More Product Information Below
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories

The XTENDEX® Low-Cost HDMI Over Gigabit IP Extender with IR and POE multicasts digital video and audio signals to one or more receivers up to 394 feet away over a 1000 Base-T Gigabit Network connected with CAT6/6a/7 cable.

Each Low-Cost HDMI Over Gigabit IP Extender with IR and POE consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

NOTE: ST-IPHD-POELC-V4 models are NOT compatible with ST-IPHD-POELC(-CLR) models due to different chipsets being used.

For more information, visit https://www.networktechinc.com/hdmi-ip-poe.html

  • Supports HDTV resolutions to 1080p. Extend up to 394 feet (120 meters) with CAT6/6a/7 cable. Extend up to 328 feet (100 meters) with CAT5e cable.
  • Cascade network switches to extend the length long distances. Up to three switches can be cascaded.
  • The max cable length between the first switch/transmitter and the last switch/receiver is 1,575 feet (480 meters) for CAT6/6a/7 or 1,312 feet (400 meters) for CAT5e cables. The max cable lengths between switches is switch dependent, but 394 feet (120 mete
  • Power over Ethernet (PoE) – power supply not required at the local or remote unit.
  • Ideal solution for digital signage applications.
  • Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
  • Transmits an HDMI signal over one CATx cable.
  • Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
  • Plug-and-Play installation allows receivers to find the transmitters automatically on the same subnet. (Network configuration may be required for managed network switch.)
  • Easily expandable. Add remote units as you add monitors.
  • Inexpensive CATx cable replaces bulky video cables.
  • Supports 1000 Base-T Ethernet connection.
  • Built in default EDID table.
  • HDMI 1.4 and HDCP 1.4 compliant.
  • Support for multiple transmitters requires a managed network switch with VLAN support. Standard LAN switches can only support one transmitter.
  • The managed switch must support port-based IEEE 802.1Q VLAN. Each VLAN acts as a separate HDMI Over IP Channel on the network. Each VLAN channel supports one transmitter. Number of local and remote units that can be used is dependent on the backplane
  • For a point-to-many connection, a standalone network with an unmanaged network switch, hub, or router can be used instead of a managed network switch.
  • Up to 253 receivers supported. It is not recommended to use any other network devices on this standalone network as it may cause a degradation in performance.
  • Local and remote units must be in the same LAN. The units do not support WAN connections.
  • NOTE: ST-IPHD-POELC-V4 models are NOT compatible with ST-IPHD-POELC(-CLR) models due to different chipsets being used.
Request more information from a dealer near you
AV-iQ Terms and Conditions  |  Privacy Policy  |  Powered by AV-iQ