VOPEX-C64K18GB-4HDBT | 4K 18Gbps HDMI HDBaseT Splitter/Extender via CAT6/6a/7: 4-Port | Network Technologies Inc (NTI) | Diversified
Pro AV Catalog
network-technologies-nti

4K 18Gbps HDMI HDBaseT Splitter/Extender via CAT6/6a/7: 4-Port

Model: VOPEX-C64K18GB-4HDBT

  • Transmits an uncompressed HDMI signal over one CAT6/6a/7 cable to multiple display locations.
  • Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 394 feet (120 meters).
  • Extend 1080p and 1920x1200 to 443 feet (135 meters).
  • Zero latency.
  • Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @30/60Hz YUV 4:4:4), HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
Compare
Project List
Product Info
Tech Specs
Documents

The VOPEX® 4K 18 Gbps HDMI HDBaseT Splitter/Extender simultaneously distributes uncompressed Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI video, multi-channel audio, RS232, and IR from one video source to up to four displays and speakers, each located up to 394 feet away via CAT6/6a/7 cable using HDBaseT technology.

The VOPEX-C64K18GB-4HDBT system consists of a 4K HDMI HDBaseT broadcast unit, which connects to the HDMI source and also supplies video to a local display via the HDMI loop output; and four included receivers for each remote 4K HDMI display and speakers. The units are interconnected by CAT6/6a/7 cable.

  • Transmits an uncompressed HDMI signal over one CAT6/6a/7 cable to multiple display locations.
  • Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 394 feet (120 meters).
  • Extend 1080p and 1920x1200 to 443 feet (135 meters).
  • Zero latency.
  • Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @30/60Hz YUV 4:4:4), HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
  • HDMI features supported:
  • HDMI 2.0 compliant.
  • Up to 36-bit Deep Color
  • LPCM, Dolby Digital, Dolby TrueHD, DTS-HD, and DTS2
  • RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0
  • Bandwidth up to 18 Gbps
  • 3D
  • HDR10
  • HDCP 2.2/1.4 compliant.
  • Supports the DDC2B protocol.
  • Includes four receivers.
  • The receivers do not require a power supply.
  • Full Infrared Remote (IR) control of HDMI source or display. IR transport channel can be forward or backward per the installation.
  • RS232 for configuration and control, pass-through, and firmware updates.
  • Supports RS232 pass-through from transmitter to receiver or from receiver to transmitter.
  • Baud rate: 115200 bps
  • Built-in EDID table.
  • Cascade units together to send video simultaneously to many receivers.
  • Mounting brackets included for easy surface/wall mounting.
  • Ideal for digital signage, tradeshows, or classrooms where high quality video on multiple displays is needed.
  • Includes:
  • One 4-port HDBaseT splitter
  • Four HDBaseT receivers
  • Five IR emitters
  • Five IR receivers
  • Five 3-pin Phoenix connectors for RS232
  • One 5-pin Phoenix connector for audio
  • One power supply