The ST-RX2 has a single line-level audio input and two line-level audio outputs. In the absence of a control input, the NORMAL module output is fed from the audio input. When the TRIG control terminal is connected to ground, the input audio is fed to the SELECT output and the NORMAL output is switched off. When the TRIG terminal is again disconnected from ground, then the SELECT output is turned off and the NORMAL output is fed from the input. The module contains no relays or other mechanical devices.
The control circuits utilize solid-state switching to route the input signal to one of the balanced output line drivers with off attenuation better than 80 dB at all audio frequencies. Soft switching is used to eliminate clicks or pops.The control current required at the TRIG terminal is so minimal (< 0.5 mA) that the ST-RX2 can be controlled from nearly any source from switches to logic circuits. The ST-RX2 may be controlled using the RDL RC2-ST, RT2 or RUC-4 remote controls.
Routing of a Line-Level Source
Audio Switched to One of Two Destinations
Silent Audio Switching
Balanced or Unbalanced Routing
Switching by Open-Collector Logic
Noise:
< -85 dB (below +4 dBu); -90 dB (typical)
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
32 F
Depth:
0.65 in
Height:
1.55 in
Width:
3 in
Switching Time Fast: Time required for NORMAL output to turn off:
10 us
Switching Time Soft:
5 ms
Switching Time Fast: Time required for NORMAL output to turn on:
15 us
Switching Time Soft:
70 ms
Switching Time Fast: Time required for SELECT output to turn off:
15 us
Switching Time Soft:
10 ms
Switching Time Fast: Time required for SELECT output to turn on:
20 us
Switching Time Soft:
35 ms
Control Signal:
TRIG terminal must be externally connected to ground.
Control Current:
0.5 mA
Headroom:
> 18 dB (above +4 dBu)
THD+N:
< 0.030 % (1 kHz)
CMRR:
> 45 dB (100 Hz)
Frequency Response:
15 to 20000 Hz (+/- 0.5 dB into 10 k ohm bridging input) 30 Hz to 20 kHz (+/- 0.5 dB into 600 ohm)
ON Gain:
Unity (Balanced input and output)
Off Attenuation:
> 80 dB (Either output); > 95 dB at 1kHz
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.