5W modular amplified loudspeaker. Can be used to monitor one or two intercom or program channels. 5W of drive power and includes a wide range 8 ohms speaker. Standard 1RU, 1/2 rack width form factor of other intercom products, including the RM-325 intercom station, the MRT-327, MCE-325, SSA-324 and others. A large variety of mounting options and hardware are available to suit any application. Has separate phono jacks for each program input and an XLR-3 connector for a two channel intercom line. A rear panel adjustment allows the user to set relative levels between the two input channels.
Dual channel inputs
Full range 5-watt speaker and power amplifier
Locally powered
Magnetically shielded
Standard configuration
Spec Sheet available - Yes
Height:
1.75" (4.45 cm)
Width:
8.2" (20.83 cm)
Depth:
8" (20.32 cm)
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
32 F
Impedance:
8 ohm
Power Handling:
5 Watt
Depth:
8 in
Height:
1.75 in
Width:
8.19 in
Product Weight:
2.76 lbs
Color:
Gray
Sensitivity:
90 ±2dB/2.83V/meter
Free Air Resonance:
200 to 250 Hz
Stray Magnetic Field:
Less than 1 gauss at a distance of 1 cm from chassis
Mechanical Noise:
Free of buzzes and rattles with 5W sinewave input from 100Hz to 22kHz
Signal-to-Noise Ratio:
75 dB reference 2W into 8 ohms
Total Harmonic Distortion:
Less than 0.5% at 2W nominal