Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Mono DSP-Enabled Amplifier 1 x 100W at 70V/100V Dante Network Enabled
Model: DSP100-1-CV-D
- Onboard full featured DSP
- Configurable via USB port
- Dante™ interface available
- 1/2 rack chassis and convection cooled
- Remote Volume Control
Product Info
Tech Specs
Related Products
Documents
The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in three versions, a 1x100W 70/100V, 2x100W 70/100V, and 2x100W at 4/8 Ohms. Each is available with a Dante™ network option. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allow for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won’t find a more cost effective way to bring outstanding sound quality to zone on the market today.
- Onboard full featured DSP
- Configurable via USB port
- Dante™ interface available
- 1/2 rack chassis and convection cooled
- Remote Volume Control
- Made in the USA Applications:
- Network Audio
- Hospitality Installations
- Board rooms
- Classrooms
- Conference rooms
- Houses of worship
- Remote locations
- Distributed or centralized venues
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 100 Hz
- Minimum Frequency Response (Bandwidth): 0.10 kHz
- Impedance: 7200 ohm
- Mount Type: Rack
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 100 Watt
- Depth: 10.70 in
- Height: 1.70 in
- Width: 8.40 in
- Product Weight: 4.50 lbs
- Noise: 100 dB
- Warranty (Length/Type): 3 Years
- Standby Power: 12 Watt
DSP100-1-CV
- DSP-enabled Amplifier, 65Hz to 20kHz Frequency Response
DSP100-2-CV
- DSP-enabled Amplifier, 65Hz to 20kHz Frequency Response
DSP100-2-CV-D
- 2-channel DSP-Enabled Amplifier 2 x 100W at 70V/100V Dante Network Enabled
DSP100-2-LZ
- DSP-enabled Amplifier, 100dB S/N Ratio
DSP100-2-LZ-D
- 2-channel DSP-Enabled Amplifier 2 x 100W at 4/8ohm Dante Network Enabled
Amplifier
216618 kb
- Data Sheet
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Diversified
close
Diversified
37 Market Street
Kenilworth, NJ 07033
USA
(908) 245-4833
www.onediversified.com
Contact in regards to this product:
Stewart Audio
Model: DSP100-1-CV-D
Request more information from a dealer near you
close
Request more information from a dealer near you
