The 1200T series Analog Clock Displays take master and slave clock technology to new levels of convenience and excellence.The clocks are microprocessor controlled and employ separate direct drive motors for each hand.This means that, as well as being able to set the time almost instantaneously, the new displays are also silent in operation.The hands of the clocks can be programmed to move in sweep mode or in steps.
Automatic detection of 30 Fps or 25 Fps SMPTE LTC timecode input
May act as an NTP client when +T option is ordered
Three motors for quiet operation and rapid hand setting - sets to time in 10s
Automatic Daylight Saving Time adjustment
Addressable slave clocks with programmable time offsets of 0 to 23.5 hours in 0.5 hour increments - set via DIP switches, RS-232 control or VistaLINK®
Accepts date information from LTC User Bits using SMPTE ST 309 or Leitch™ protocol
Master or Slave operation with battery backed up clock
Single cable distribution for both power and NTP using IEEE 802.3at Power over Ethernet
Optional back lighting of clock face
Two sizes 16"
Time may be set manually via pushbutton switches, or through the RS-232 serial port, or via VistaLINK®
Completely self-setting with NTP, (optioal) SMPTE timecode input or battery back-up
Built-in quartz time base oscillator with battery back-up
May be configured as a timecode generator to drive other clocks
Lighting brightness is adjustable
Powered by 12V DC (with 50/60Hz, 100 to 240V AC adapter), or IEEE 802.3at Power over Ethernet
10/100Mbit Ethernet port for NTP and SNMP control/monitoring with VistaLINK® Pro
AC Voltage (Maximum):
AC Voltage (Minimum):
SMPTE ST 12-1 linear time code - 25 or 29.97 drop-frame Fps nominal
Phoenix 4 pin terminal connector
1V p-p nominal
configurable as loop thru from input or output of local clock time
< 2s per day with power on, no timecode present < 10s / day with power removed
Time Zone Offset:
0 to 23½ hours in ½ hour increments
8 data bits, no parity, 2 stop bits
Fast Ethernet 100 Base-TX IEEE 802.3u standard for 100 Mbps baseband CSMA/CD local area network
NTP v4 compliant, client mode support when +T option installed
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds: